Blind Spot Module (BSM) Flash Process Failed: "Negative Response 0x22 – 'Conditions Not Correct' Received"

October 14, 2013, 1:42 pm

≫ Next: Blind Spot Module (BSM) Flash Process Failed: "Negative Response 0x12 – 'Sub Function Not Supported' Received"

≪ Previous: Blind Spot Module (BSM) Flash Process Failed: ECU Reports Unknown Precondition

$

0

0

DESCRIPTION: The Blind Spot System is composed of a blind spot module (BSM), left rear blind spot sensor, and right rear blind spot sensor. When flashing the BSM, the system must be working as designed with no...

---

Blind Spot Module (BSM) Flash Process Failed: "Negative Response 0x12 – 'Sub Function Not Supported' Received"

October 14, 2013, 1:42 pm

≫ Next: 2011 JC/JF/LX/LD (Journey/Freemont/300/Charger) Common Body Controller/Body Control Module (CBC/BCM) Returns Invalid Part Number Resulting in No Flash Files Available

≪ Previous: Blind Spot Module (BSM) Flash Process Failed: "Negative Response 0x22 – 'Conditions Not Correct' Received"

$

0

0

DESCRIPTION: The Blind Spot system is composed of a blind spot module (BSM), left rear blind spot sensor, and right rear blind spot sensor. When flashing the BSM, the system must be working as...

2011 JC/JF/LX/LD (Journey/Freemont/300/Charger) Common Body Controller/Body Control Module (CBC/BCM) Returns Invalid Part Number Resulting in No Flash Files Available

October 15, 2013, 5:48 am

≫ Next: 2013 DS/DX (Ram 1500) Body Control Module (BCM) Part Number Cannot Be Read When Attempting a Re-Flash After an Abort

≪ Previous: Blind Spot Module (BSM) Flash Process Failed: "Negative Response 0x12 – 'Sub Function Not Supported' Received"

$

0

0

VEHICLES: 2011 JC (Journey) 2011 JF (Freemont) 2011 LX (300) 2011 LD (Charger) ECU: Common Body Controller/Body Control Module (CBC/BCM) DESCRIPTION: This is a CBC/BCM...

2013 DS/DX (Ram 1500) Body Control Module (BCM) Part Number Cannot Be Read When Attempting a Re-Flash After an Abort

October 15, 2013, 5:55 am

≫ Next: Sprinter Electronic Shift Module (ESM) Known Flash Reprogramming Failure: Negative Response 0x22

≪ Previous: 2011 JC/JF/LX/LD (Journey/Freemont/300/Charger) Common Body Controller/Body Control Module (CBC/BCM) Returns Invalid Part Number Resulting in No Flash Files Available

$

0

0

VEHICLE: 2013 DS/DX (Ram Truck 1500) ECU: Body Control Module (BCM) DESCRIPTION: If the BCM ECU flash process is aborted, interrupted, or fails within approximately the first 6% of the flash reprogramming...

Sprinter Electronic Shift Module (ESM) Known Flash Reprogramming Failure: Negative Response 0x22

October 15, 2013, 5:59 am

≫ Next: 2006 KJ Diesel TCM: wiTECH Diagnostic Application Freezes at “Turn Key to Off then to Run” when Using the wiPOD VCI Device

≪ Previous: 2013 DS/DX (Ram 1500) Body Control Module (BCM) Part Number Cannot Be Read When Attempting a Re-Flash After an Abort

$

0

0

ERROR MESSAGE: Negative response 0x22 - ''Conditions Not Correct or Request Sequence Error'' received from Start Diagnostic Session Programming request DESCRIPTION: Flashing (reprogramming) the...

2006 KJ Diesel TCM: wiTECH Diagnostic Application Freezes at “Turn Key to Off then to Run” when Using the wiPOD VCI Device

October 15, 2013, 6:13 am

≫ Next: DS (Ram Truck) HB (Durango) Hybrid Electric Vehicle (HEV) and Plug-In Hybrid Electric Vehicle (PHEV) TCM Flash (Reprogramming) Failure: “NR 0x22 - 'Conditions Not Correct or Request Sequence Error' received”

≪ Previous: Sprinter Electronic Shift Module (ESM) Known Flash Reprogramming Failure: Negative Response 0x22

$

0

0

VEHICLE: 2006 KJ (Liberty) 2.8L Diesel DESCRIPTION: When using the wiPOD VCI device, the wiTECH Diagnostic Application may freeze at “Turn Key Off then to...

DS (Ram Truck) HB (Durango) Hybrid Electric Vehicle (HEV) and Plug-In Hybrid Electric Vehicle (PHEV) TCM Flash (Reprogramming) Failure: “NR 0x22 - 'Conditions Not Correct or Request Sequence Error' received”

October 15, 2013, 6:23 am

≫ Next: 2012 PF (Dart) Occupant Restraint Controller (ORC) Flash Process Failure: No Response Received from Write Data By Identifier Request

≪ Previous: 2006 KJ Diesel TCM: wiTECH Diagnostic Application Freezes at “Turn Key to Off then to Run” when Using the wiPOD VCI Device

$

0

0

DESCRIPTION: Flashing a PHEV TCM may result in an error message of “NR 0x22 - 'Conditions Not Correct or Request Sequence Error' received.” Flashing a PHEV TCM is very robust and has a very low flash failure...

2012 PF (Dart) Occupant Restraint Controller (ORC) Flash Process Failure: No Response Received from Write Data By Identifier Request

October 15, 2013, 6:48 am

≫ Next: 2010 JC (Journey) Occupant Restraint Controller (ORC) Flash Process Failed: Negative Response 0x22 – “Conditions Not Correct” Received

≪ Previous: DS (Ram Truck) HB (Durango) Hybrid Electric Vehicle (HEV) and Plug-In Hybrid Electric Vehicle (PHEV) TCM Flash (Reprogramming) Failure: “NR 0x22 - 'Conditions Not Correct or Request Sequence Error' received”

$

0

0

VEHICLE: 2012 PF (Dart) ERROR MESSAGE: “no response received from Write Data By Identifier request”. DESCRIPTION: Flashing an ORC ECU is very robust and...

---

2010 JC (Journey) Occupant Restraint Controller (ORC) Flash Process Failed: Negative Response 0x22 – “Conditions Not Correct” Received

October 15, 2013, 6:53 am

≫ Next: 2011 D2/DD/DP/DJ (Ram Trucks) 6.7L Cummins Diesel Wireless Ignition Node (WIN) Flash Process Failed: No Response from Transfer Data Request

≪ Previous: 2012 PF (Dart) Occupant Restraint Controller (ORC) Flash Process Failure: No Response Received from Write Data By Identifier Request

$

0

0

VEHICLE: 2010 JC Journey all engines. ERROR MESSAGE: Negative response 0x22 – “Conditions Not Correct” received. ROOT CAUSE: This error...

2011 D2/DD/DP/DJ (Ram Trucks) 6.7L Cummins Diesel Wireless Ignition Node (WIN) Flash Process Failed: No Response from Transfer Data Request

October 15, 2013, 7:43 am

≫ Next: 2011 D2/DD/DP/DJ/DS/DX (Ram Trucks) LC (Challenger) RT (Caravan/Town & Country) W2 (Grand Cherokee CKD) WD (Durango) WK (Grand Cherokee) Wireless Ignition Node/Wireless/Wireless Control Module (WIN/WCM) Flash Reprogramming

≪ Previous: 2010 JC (Journey) Occupant Restraint Controller (ORC) Flash Process Failed: Negative Response 0x22 – “Conditions Not Correct” Received

$

0

0

VEHICLES: 2011 D2/DD/DP/DJ (Ram Trucks) 6.7L Cummins Diesel ECU: Wireless Ignition Node/Wireless Control Module (WIN/WCM) ERROR MESSAGE: Flash Process Failed – No Response from Transfer...

2011 D2/DD/DP/DJ/DS/DX (Ram Trucks) LC (Challenger) RT (Caravan/Town & Country) W2 (Grand Cherokee CKD) WD (Durango) WK (Grand Cherokee) Wireless Ignition Node/Wireless/Wireless Control Module (WIN/WCM) Flash Reprogramming

October 15, 2013, 7:47 am

≫ Next: 2010-2012 LC (Challenger) WK (Grand Cherokee) WIN/WCM (Wireless Ignition Node/Wireless Control Module) Flash Process Failed: Negative Response 0x22 - 'Conditions Not Correct or Request Sequence Error' Received from Transfer Data Request

≪ Previous: 2011 D2/DD/DP/DJ (Ram Trucks) 6.7L Cummins Diesel Wireless Ignition Node (WIN) Flash Process Failed: No Response from Transfer Data Request

$

0

0

VEHICLES: 2011 D2/DD/DP/DJ/DS/DX (Ram Trucks) 2011 LC (Challenger) 2011 RT (Caravan/Town & Country) 2011 W2 Grand Cherokee CKD) 2011 WD (Durango) 2011 WK (Grand Cherokee ECU: Wireless...

2010-2012 LC (Challenger) WK (Grand Cherokee) WIN/WCM (Wireless Ignition Node/Wireless Control Module) Flash Process Failed: Negative Response 0x22 - 'Conditions Not Correct or Request Sequence Error' Received from Transfer Data Request

October 15, 2013, 7:58 am

≫ Next: International Only 2006-2009 PM (Caliber) MK (Compass/Patriot) Intrusion Theft Module (ITM) Flash Process Failure: Invalid Response Received from ECU - Response Does Not Contain Original PID

≪ Previous: 2011 D2/DD/DP/DJ/DS/DX (Ram Trucks) LC (Challenger) RT (Caravan/Town & Country) W2 (Grand Cherokee CKD) WD (Durango) WK (Grand Cherokee) Wireless Ignition Node/Wireless/Wireless Control Module (WIN/WCM) Flash Reprogramming

$

0

0

VEHICLE: 2010-2012 LC (Challenger) 2010-2012 WK (Grand Cherokee) ECU: Wireless Control Module (WCM) Wireless Ignition Node (WIN) ERROR MESSAGE: Negative response 0x22 - 'Conditions Not...

International Only 2006-2009 PM (Caliber) MK (Compass/Patriot) Intrusion Theft Module (ITM) Flash Process Failure: Invalid Response Received from ECU - Response Does Not Contain Original PID

October 15, 2013, 8:02 am

≫ Next: 2011 LD (Charger) JF (Freemont) JC (Journey) RFHub Flash Process Failed: Negative Response 0x22 - 'Conditions Not Correct' Received from Start Diagnostic Session Programming Request

≪ Previous: 2010-2012 LC (Challenger) WK (Grand Cherokee) WIN/WCM (Wireless Ignition Node/Wireless Control Module) Flash Process Failed: Negative Response 0x22 - 'Conditions Not Correct or Request Sequence Error' Received from Transfer Data Request

$

0

0

VEHICLES: 2006-2009 PM (Caliber), international only 2006-2009 MK (Compass/Patriot), international only ECU: ITM (Intrusion Theft Module) ERROR MESSAGE: Invalid response received...

2011 LD (Charger) JF (Freemont) JC (Journey) RFHub Flash Process Failed: Negative Response 0x22 - 'Conditions Not Correct' Received from Start Diagnostic Session Programming Request

October 15, 2013, 8:11 am

≫ Next: 2012-2013 PF (Dart) Radio Frequency Hub (RFHub) Abort Recovery Procedure

≪ Previous: International Only 2006-2009 PM (Caliber) MK (Compass/Patriot) Intrusion Theft Module (ITM) Flash Process Failure: Invalid Response Received from ECU - Response Does Not Contain Original PID

$

0

0

Vehicle: 2011 LD (Charger) 2011 JC (Journey) 2011 JF (Freemont) ECU: RFHub ECU ERROR MESSAGE: Negative response 0x22 - 'Conditions Not Correct' received from Start Diagnostic...

2012-2013 PF (Dart) Radio Frequency Hub (RFHub) Abort Recovery Procedure

October 15, 2013, 8:29 am

≫ Next: 2012 Fiat 500 (FF) Instrument Panel Cluster (IPC) Flash Process Failed: Negative Response 0x35 - Invalid Key Received from Security Send Key Request

≪ Previous: 2011 LD (Charger) JF (Freemont) JC (Journey) RFHub Flash Process Failed: Negative Response 0x22 - 'Conditions Not Correct' Received from Start Diagnostic Session Programming Request

$

0

0

VEHICLE: 2012-2013 PF (Dart) ECU: Radio Frequency Hub (RFHub) DESCRIPTION: There are 2 RFHub ECU issues that have been identified and should not be mistaken for wiTECH Diagnostic Application...

---

2012 Fiat 500 (FF) Instrument Panel Cluster (IPC) Flash Process Failed: Negative Response 0x35 - Invalid Key Received from Security Send Key Request

October 15, 2013, 9:37 am

≫ Next: 2012 Fiat 500 (FF) Instrument Panel Cluster (IPC) Flash Process Failed: Could Not Open Required Hardware Channel to Vehicle

≪ Previous: 2012-2013 PF (Dart) Radio Frequency Hub (RFHub) Abort Recovery Procedure

$

0

0

VEHICLE: 2012 Fiat 500 (FF) ECU: Instrument Panel Cluster (IPC) ERROR MESSAGE: Flash process failed - negative response 0x35 - Invalid Key received from Security Send Key...

2012 Fiat 500 (FF) Instrument Panel Cluster (IPC) Flash Process Failed: Could Not Open Required Hardware Channel to Vehicle

October 15, 2013, 9:46 am

≫ Next: 2011-2012 LX/LD (300/Charger) Instrument Panel Cluster (IPC) Flash Process Failed: Negative Response 0x36 - 'Exceed Number Of Attempts' Received from Security Request Seed Request

≪ Previous: 2012 Fiat 500 (FF) Instrument Panel Cluster (IPC) Flash Process Failed: Negative Response 0x35 - Invalid Key Received from Security Send Key Request

$

0

0

VEHICLE: 2012 Fiat 500 (FF) DESCRIPTION: This particular flash failure is known to be caused by a poor networking environment. Networking issues are very difficult to detect and can be intermittent at times,...

2011-2012 LX/LD (300/Charger) Instrument Panel Cluster (IPC) Flash Process Failed: Negative Response 0x36 - 'Exceed Number Of Attempts' Received from Security Request Seed Request

October 15, 2013, 9:50 am

≫ Next: 2011-2012 LX/LD (300/Charger) Instrument Panel Cluster (IPC) Flash Process Failed: Negative Response 0x37 - 'Required Time Delay Not Expired' Received from Security Request Seed Request

≪ Previous: 2012 Fiat 500 (FF) Instrument Panel Cluster (IPC) Flash Process Failed: Could Not Open Required Hardware Channel to Vehicle

$

0

0

VEHICLES: 2011-2012 LX (300) 2011-2012 LD (Charger) ECU: Instrument Panel Cluster (IPC) ERROR MESSAGE: negative response 0x36 - 'Exceed Number Of Attempts' received from...

2011-2012 LX/LD (300/Charger) Instrument Panel Cluster (IPC) Flash Process Failed: Negative Response 0x37 - 'Required Time Delay Not Expired' Received from Security Request Seed Request

October 15, 2013, 9:52 am

≫ Next: 2012 JC/JF (Journey/Freemont) Electronic Pedestrian Protection Module (EPPM) Flash Process Failed: No Response Received from Start Routine By Identifier Request

≪ Previous: 2011-2012 LX/LD (300/Charger) Instrument Panel Cluster (IPC) Flash Process Failed: Negative Response 0x36 - 'Exceed Number Of Attempts' Received from Security Request Seed Request

$

0

0

VEHICLES: 2011-2012 LX (300) 2011-2012 LD (Charger) ECU: Instrument Panel Cluster (IPC) ERROR MESSAGE: negative response 0x37 - 'Required Time Delay Not Expired' received from...

2012 JC/JF (Journey/Freemont) Electronic Pedestrian Protection Module (EPPM) Flash Process Failed: No Response Received from Start Routine By Identifier Request

October 15, 2013, 10:02 am

≫ Next: VSIM Appears Greyed out When Viewing Topology Screen in 13.03

≪ Previous: 2011-2012 LX/LD (300/Charger) Instrument Panel Cluster (IPC) Flash Process Failed: Negative Response 0x37 - 'Required Time Delay Not Expired' Received from Security Request Seed Request

$

0

0

VEHICLES: 2012 JC (Journey) 2012 JF (Freemont) ECU: Electronic Pedestrian Protection Module (EPPM) ERROR MESSAGE: Flash process failed - no response...