Blind Spot Module (BSM) Flash Process Failed: "Negative Response 0x22 –...
DESCRIPTION: The Blind Spot System is composed of a blind spot module (BSM), left rear blind spot sensor, and right rear blind spot sensor. When flashing the BSM, the system must be working as designed...
View ArticleBlind Spot Module (BSM) Flash Process Failed: "Negative Response 0x12 – 'Sub...
DESCRIPTION: The Blind Spot system is composed of a blind spot module (BSM), left rear blind spot sensor, and right rear blind spot sensor. When flashing the BSM, the system must be working as...
View Article2011 JC/JF/LX/LD (Journey/Freemont/300/Charger) Common Body Controller/Body...
VEHICLES: 2011 JC (Journey) 2011 JF (Freemont) 2011 LX (300) 2011 LD (Charger) ECU: Common Body Controller/Body Control Module (CBC/BCM) DESCRIPTION: This is a CBC/BCM...
View Article2013 DS/DX (Ram 1500) Body Control Module (BCM) Part Number Cannot Be Read...
VEHICLE: 2013 DS/DX (Ram Truck 1500) ECU: Body Control Module (BCM) DESCRIPTION: If the BCM ECU flash process is aborted, interrupted, or fails within approximately the first 6% of the flash...
View ArticleSprinter Electronic Shift Module (ESM) Known Flash Reprogramming Failure:...
ERROR MESSAGE: Negative response 0x22 - ''Conditions Not Correct or Request Sequence Error'' received from Start Diagnostic Session Programming request DESCRIPTION: Flashing (reprogramming) the...
View Article2006 KJ Diesel TCM: wiTECH Diagnostic Application Freezes at “Turn Key to Off...
VEHICLE: 2006 KJ (Liberty) 2.8L Diesel DESCRIPTION: When using the wiPOD VCI device, the wiTECH Diagnostic Application may freeze at “Turn Key Off then to...
View ArticleDS (Ram Truck) HB (Durango) Hybrid Electric Vehicle (HEV) and Plug-In Hybrid...
DESCRIPTION: Flashing a PHEV TCM may result in an error message of “NR 0x22 - 'Conditions Not Correct or Request Sequence Error' received.” Flashing a PHEV TCM is very robust and has a very low flash...
View Article2012 PF (Dart) Occupant Restraint Controller (ORC) Flash Process Failure: No...
VEHICLE: 2012 PF (Dart) ERROR MESSAGE: “no response received from Write Data By Identifier request”. DESCRIPTION: Flashing an ORC ECU is very robust and...
View Article2010 JC (Journey) Occupant Restraint Controller (ORC) Flash Process Failed:...
VEHICLE: 2010 JC Journey all engines. ERROR MESSAGE: Negative response 0x22 – “Conditions Not Correct” received. ROOT CAUSE: This error...
View Article2011 D2/DD/DP/DJ (Ram Trucks) 6.7L Cummins Diesel Wireless Ignition Node...
VEHICLES: 2011 D2/DD/DP/DJ (Ram Trucks) 6.7L Cummins Diesel ECU: Wireless Ignition Node/Wireless Control Module (WIN/WCM) ERROR MESSAGE: Flash Process Failed – No Response from Transfer...
View Article2011 D2/DD/DP/DJ/DS/DX (Ram Trucks) LC (Challenger) RT (Caravan/Town &...
VEHICLES: 2011 D2/DD/DP/DJ/DS/DX (Ram Trucks) 2011 LC (Challenger) 2011 RT (Caravan/Town & Country) 2011 W2 Grand Cherokee CKD) 2011 WD (Durango) 2011 WK (Grand Cherokee ECU: Wireless...
View Article2010-2012 LC (Challenger) WK (Grand Cherokee) WIN/WCM (Wireless Ignition...
VEHICLE: 2010-2012 LC (Challenger) 2010-2012 WK (Grand Cherokee) ECU: Wireless Control Module (WCM) Wireless Ignition Node (WIN) ERROR MESSAGE: Negative response 0x22 - 'Conditions Not...
View ArticleInternational Only 2006-2009 PM (Caliber) MK (Compass/Patriot) Intrusion...
VEHICLES: 2006-2009 PM (Caliber), international only 2006-2009 MK (Compass/Patriot), international only ECU: ITM (Intrusion Theft Module) ERROR MESSAGE: Invalid response received...
View Article2011 LD (Charger) JF (Freemont) JC (Journey) RFHub Flash Process Failed:...
Vehicle: 2011 LD (Charger) 2011 JC (Journey) 2011 JF (Freemont) ECU: RFHub ECU ERROR MESSAGE: Negative response 0x22 - 'Conditions Not Correct' received from Start Diagnostic...
View Article2012-2013 PF (Dart) Radio Frequency Hub (RFHub) Abort Recovery Procedure
VEHICLE: 2012-2013 PF (Dart) ECU: Radio Frequency Hub (RFHub) DESCRIPTION: There are 2 RFHub ECU issues that have been identified and should not be mistaken for wiTECH Diagnostic Application...
View Article2012 Fiat 500 (FF) Instrument Panel Cluster (IPC) Flash Process Failed:...
VEHICLE: 2012 Fiat 500 (FF) ECU: Instrument Panel Cluster (IPC) ERROR MESSAGE: Flash process failed - negative response 0x35 - Invalid Key received from Security Send Key...
View Article2012 Fiat 500 (FF) Instrument Panel Cluster (IPC) Flash Process Failed: Could...
VEHICLE: 2012 Fiat 500 (FF) DESCRIPTION: This particular flash failure is known to be caused by a poor networking environment. Networking issues are very difficult to detect and can be intermittent at...
View Article2011-2012 LX/LD (300/Charger) Instrument Panel Cluster (IPC) Flash Process...
VEHICLES: 2011-2012 LX (300) 2011-2012 LD (Charger) ECU: Instrument Panel Cluster (IPC) ERROR MESSAGE: negative response 0x36 - 'Exceed Number Of Attempts' received from...
View Article2011-2012 LX/LD (300/Charger) Instrument Panel Cluster (IPC) Flash Process...
VEHICLES: 2011-2012 LX (300) 2011-2012 LD (Charger) ECU: Instrument Panel Cluster (IPC) ERROR MESSAGE: negative response 0x37 - 'Required Time Delay Not Expired' received from...
View Article2012 JC/JF (Journey/Freemont) Electronic Pedestrian Protection Module (EPPM)...
VEHICLES: 2012 JC (Journey) 2012 JF (Freemont) ECU: Electronic Pedestrian Protection Module (EPPM) ERROR MESSAGE: Flash process failed - no response...
View Article